Home » Swimming Pool » 6 Ways To Keep Your Swimming Pool Sparkling Clean all Summer Long 

6 Ways To Keep Your Swimming Pool Sparkling Clean all Summer Long 

Without swimming pools or other fun ways to cool of the hellish weather, summer would not be a favorite time of the year as it actually is. But let’s face it, no one enjoys using a swimming pool that looks more like a frog maternity ward, than a place where you want to spend the most pleasant portion of a hot, sunny day.

Jokes aside, but blurry pool water is not a novelty, yet, there are ways to keep your swimming pool sparkling clean all summer long. What you need to do is follow the pieces of advice we shall list for you in the lines below and enjoy your swimming pool without fearing you will end up with a skin rash.

Why Swimming Pools Get Dirty?

Source: sunrisepool.com

There are numerous reasons why a swimming pool might appear dirty, and all the potential issues can be treated, thus worry not. Reasons vary from poor maintenance to faulty functioning water filters, but the good news is you can fix everything if you act promptly and save the summer. One thing is certain if the swimming pool water is not transparent, there is something seriously wrong and you need to act as soon as possible.

1. Chemical Disbalance

Source: familypoolsandspas.com

Fortunately, nowadays you can check the condition of the water from your pool much easier than it was the case a few years ago. If you are using your swimming pool all year round, you must have noticed that summer is the season when maintaining the water quality is the most challenging, which is reasonable, due to high temperatures.

You should check the status of the water two times a week and make sure the pH levels are optimal for swimming. Although you can purchase a pool water test kit, using swimming pool test strips is both cheaper and a more reliable way to find out what is going on under the water.

2. What to Do about pH?

Source: cloroxpool.com

The catch about pH levels is that neither do you want the water to become an acidic environment, nor you want it to be alkaline. It is not complicated to make that happen, since chemistry is an exact science and there is no room for improvisation.

If pH levels are below 7.2 that would imply that the water needs treatment because it is too acidic and it proves to be an ideal environment for algae to thrive. In that case, you can use soda crystals to raise the pH levels of your water and improve its quality.

If the readings tell that the pH levels are beyond 7.8, you would still need to treat the water because its alkaline properties are not good for the ones using the swimming pool.

The implementation of Hydrochloric acid or Sodium Bisulphate would fix this issue, but you should not use it without knowing how much of the substance would be ideal for your cause. Worry not, but find additional info on how to fix numerous issues and improve the quality of your swimming pool experience at gordonave.com.au.

3. Skim Your Swimming Pool Daily

Source: hthpools.com

Although emphasizing that you need to get stuff such as leaves and small branches regularly might be sufficient, we still need to address its importance. If you leave your pool unattended for too long, everything of the organic origin would start to decompose and lure various bacteria that would compromise the quality of the water.

It is particularly important to clean your swimming pool after any type of precipitation since wind can cause additional disbalances in water’s chemistry by bringing dust and other impurities. They say that prevention is the mother of treatments, so what you might do is covering your swimming pool when you are not using it or when you know that the weather is going to change for the worse.

4. Check the Filters

Source: hubaalnews.net

Although you do not need to pay constant attention to the state of your pool’s filters, they still need to be attended from time to time. If you do not notice anything unusual, you should clean the filters at least twice a year.

On the other hand, smelly water or sluggish pool floor might be the warning signs that something is wrong with your filtering system. Filters are a breathing system of your swimming pool and are the most important factor in keeping it clean, so any malfunction or clogging would affect the water quality almost instantly. 

5. Water Level

Source: aquacal.com

No matter how big or small your swimming pool might be, you still need to pay attention to its water level in order to secure everything functions the way it should. Namely, water tends to evaporate easily when the temperatures are high, so you need to replenish what is lost in order not to disturb the balance of the pool.

Namely, even the loss of small amounts of water can affect the chemistry levels because other elements do not evaporate but increase their concentration, which affects both the pH level and the condition of the water in general.

6. Brush and Vacuum

Source: floridapoolpatio.com

Using additional tools to treat your swimming pool is a must if you intend on keeping your water as clear as it can ever be. While the vacuuming is ideal for the bottom, brushing the sides is what you need to focus your attention on to make sure everything is under control.

It is unfortunate how people neglect their swimming pools when they realize how much effort is needed to keep things tip-top. On the other hand, others ask professional pool maintenance services for assistance when they realize how keeping a pool clean can become complicated.

Hopefully, we have made clear what you need to do in order to keep your water quality as optimal as possible. It is not one, but all of the aforementioned pieces of advice that you need to utilize so you experience the most pleasant time while you use your swimming pool. Also, make sure you do it at the right time, so you can start the summer season as soon as it becomes hotter than you can handle without your swimming pool.

Scroll to Top
Scroll to Top